Single Measles Vaccine

Kit The secret of perfect

scrach on a tank- Built ork is well known, there is never enough rivets. You know, the rivets is my passion. But in my endless quest to perfect the rivet, I think I've reached the ultimate in geekery outillesque! Hook you well, I'll reveal my secret:

is a bit over-kill non? Resume from the beginning ... Everything begins a year earlier on the site Micro-Mark , a web-store American model of specialized tools. Let us say at once, the first visit to this site may cause you to lose your night, as there are references on this incredible site. It's simple, it is my bible tools are used. It is precisely during one of those evenings that lost I came across this ... Presses rivets in the $ 25!

Only problem, these tips are associated with rivet a machine that costs $ 90 in :

To which must be added $ 50 accessory that goes well for accommodate the female end and guide all:

And there is the drama, it falls into the accessory pro and both say that $ 175 plus shipping to international miniature rivets, it hurts. So, I tell myself that all I need is a system to use these tips at $ 25 one vertically against each other, without necessarily needing the rest. And miraculously, I had this tool: a drill press with table Proxxon cross. Neither one nor two, I order my tips and this is what I get two weeks:

You end up with 5 pairs of male-female fittings ranging in size from 1 to 5, over a spigot sharp. The problem is now able to use it with my drill, so I prepared a wooden base to accommodate the tips:

So here I am ready to party female. For the male part, put it all together on the drill:

This is a drill Proxxon TBM 220 3 speeds associated with a cross table two axes XY.

The 3 speeds are actually attached with the report of the transmission belt between the gear motor and the spindle axis. One can easily change the configuration when the machine is stopped, when the cover removed:

But enough detail on this drill (which I am fully satisfied:)) we are here to talk rivets .

Once the wooden base placed on the cross table, firmly tightened with the two metal clamps, here's what you get:

And more loan:

And yet more ready:

was so tight a spigot in the chuck, number 3 in this example, perfectly aligned with the female in the wooden base. The press is naturally with the column of the drill, stopping of course, by pushing the lever for this purpose. We can also pre-set maximum depth down the column using the guide below:

But in my case, it is not necessary. The two ends fit together perfectly, so no need to set maximum depth.

Or:

Also:

And now you know all the hardware side!

Masterbate On Coccaine

rivet tool : The Chopper II

Geek tools. If we were to find expression for my passion for tools, is what would be the closest to reality:). Always trying to improve my technique and especially to facilitate my work, I present to you today "The Chopper II" NWSL . I came across this tool on sites specialized in model railways.

This is actually a miniature cutter equipped with a wide blade knife (kind of tools to clean the putty for glass tiles ...). All this fits in a metal block of 18 cm square of space on what maximize the workshop. Here is what one finds in the box:

The frame includes a cutting mat self-repair ("Self Healing Cutting Mat"). The cutter may move on its axis, it comes with two brackets to guide the cutting angles on conventional (30 ° -45 ° -60 ° -90 °).

These two brackets are fixed against a rail to ensure the fixed reference. For other angles, one can easily adjust the brackets without the use of rail to achieve the desired angle.

blade can be changed easily with a screwdriver. As can be seen below, the blades are generic, are found in all hardware stores.

I have not received the package but on paper, the advantages of this tool compared to a simple modeling knife in my opinion are:

• The accuracy of the A cutting angle
• pressure perfectly vertical
• Re-utisabilité: plan your angle once and for all sections of the same.
  
• cutter blade universal, easily maintainable and changeable
• The seriousness of the mark
  

But he also at first glance Disadvantages:

• Only suitable for thin (\u0026lt;1mm) and small parts (\u0026lt;size of the blade) .
• Pricing: In the 50 € in U.S. imports on ebay, including postage.
  

short, it feels good, on paper this is not an essential tool, but rather more generally improving the quality and productivity of its creations. The comments I have read here and there on this tool are extremely positive, then it remains for me to wait patiently for my package, and you make a comeback after being taken over!

The following receipt!

PS: Hey, even a brand that is yellow and green everywhere ... :)